Vitara SE SV Rear Bumper Full DIY Flat Pack Kit
Vitara SE SV Rear Bumper Full DIY Flat Pack Kit.
MADE TO ORDER: 1-2 weeks.
This is the full kit. See our other listings for bumper only and other options.
Suits SV series 5 door and also 3 door and SE series models with some alterations. May suit other models, see sizes below.
SV 1995-1998
SV series 5 door
SV series 3 door (trimming required)
SE 1988-1998
SE series 5 door
SE series 3 door (trimming required)
Overall width in design: 1670mm
Overall height: 240mm (bumper)
Overall depth (front to back): 470mm
Approximate weight complete: 48kgs with tubes and pivot axles assembled
Design to suit up to 32" x 12" wheel (can be adjusted when building)
Our Vitara DIY flat pack kit is availble as a bumper only kit or a full kit including the spare tyre swing out and/or the jerry can swing out flat plate parts. We design out flat packs to take out the difficult folding part by providing cuts along the fold lines so they can be bent on a bench and hold position before welding the corner.
This kit includes 3mm thick mild steel centre and wings plates, wing end infill and top infill plates, jerry can holder parts and spare wheel arm flat parts.
Not included and required to complete the bumper:
- Welder, grinder plus additional tools where required.
- Welding and measure skills.
- Swing out pivot axles and locking latches (available from ebay as a set or individually)
- 50x50x3mm square hollow section tube approximate lengths:
- Jerry can swing out arm 1 x 420mm
- Spare tyre swing out arm 1 x 570mm, 1 x 460mm, 1 x 370mm
- Mounting brackets and bolts (done by the fabricator/installer)
- No Instructions as the kit is designed to be a custom bumper.
We provide a warranty on incorrect parts supplied only as this is a kit and you will need to assemble and weld. Instructions not included as this is a build-your-own kit and you can customise it how you like.
We don't offer a fabrication service unfortunately so we aren't able to make them, just offer the kits.