TPE G16A Replacement Long Motor

TPE G16A Replacement Long Motor
 
TriForce Precision Engines Replacement G16A Long Motor 8 Valve Cylinder Head For Electric Fuel Pump.
 
G16A Carburettor version requires the mechanical fuel pump to be replaced with a low pressure electric fuel pump and tachometric relay.
 
Brand new G16A replacement long motor with a 8 valve cylinder head. Made with high precision and quality materials. TriForce have developed a replacement G16A motor with the same bore size of 75mm and a crankshaft stroke of 90mm. Also features cast in steel liners, unique serial number, steel welsh plugs, bearing end caps and bolts, camshaft, assembled 8 valve cylinder head, Vitara water pump, valve cover and SE Vitara style oil pan.

TriForce Precision Engines offer a 12 month manufacturer standard use warranty so you can trust the quality of their products!
 
Specifications:
*Condition: New
*Brand: TriForce Precision Engines
*Bore: 75mm
*Stroke: 90mm
*Compression Ratio: 8.9:1
*Capacity: 1590cc
*Camshaft: Spiral gear end for distributor
*Valves: 8
*Oil pan: 4wd Vitara style
*Oil filler cap location: Rear
*Bell housing: G16A/G16B pattern
*Spark plugs: Included
*Oil filter: Included
*Manifold gaskets: Not included
*Oil: Not included
*Packaging: Foam moulded box inside a wood crate.
 
Suits all the following models with a G16A motor:
*Suzuki Vitara 1988 to 1994 with a 1.6 litre G16A EFI engine
*Suzuki Swift 1989 to 1995 with 1.6 litre G16A EFI engine
*Suzuki G16A carburettor models, require electric low pressure fuel pump and tachometic relay (not included)
 
 
Also suits conversions into a Sierra using some other parts. Jimny and Sierra will need to reuse their oil pans and possibly other parts.
 
 
Warranty:
*12 months or 50,000km, whichever is reached first, manufacturers limited warranty on defects and assembly.
*Standard application use only.
*Defective on arrival must be notified by email with photos and description to us within 3 days.
*Installation must be done by a qualified experienced mechanic at a engine installation/building shop and details recorded along with warranty installer card filled out and emailed back.
*Installation must be done within 50 days of receiving the product and must be kept inside its original packaging. This is to ensure the products remain in good condition and corrosion free.
*Services and maintenance to be done every 5000km including oil and filter changes by a qualified and licenced mechanical workshop. First oil change within 500km, then every 5000km after.
*Further terms and conditions are on our terms and conditions page.